²ÝÁñÉçÇø

Partner Insight: Make bales of best quality, scientist says

Baled grass silage can be as good as clamped silage, says Volac silage scientist, Dr Mark Leggett, but it is essential to employ equal attention to detail when making it – starting by cutting grass at the optimum time.

clock • 2 min read
Partner Insight: Make bales of best quality, scientist says

Baled grass silage can be as good as clamped silage, says Volac silage scientist, Dr Mark Leggett, but it is essential to employ equal attention to detail when making it – starting by cutting grass at the optimum time.

"Cut grass at its nutritional peak, which is before heading," says Dr Leggett, "rather than cutting when it's older and lignified as often the case with bales. Also, wilt to the optimum dry matter (DM) content.

"Typically, 35-45% DM is considered optimum for baled grass silage. This might be appropriate for beef and sheep. But dairy farmers shouldn't be afraid to aim for the lower end of this DM range.

"This not only reduces wilting times, to reduce in-field nutrient losses, but a lower %DM also improves the fermentation and reduces the risk of heating and spoilage.

"Bales have a large surface area, so sealing rapidly against air is also vital with all %DMs to reduce heating and spoilage."

Dr Leggett says it is also important to choose the correct type of additive to reduce losses in bale quality and DM.

"Tailor the additive used to the bale % DM and to how long the opened bale will be exposed to air for at feedout.

Bales have a large surface area, so sealing rapidly against air is also vital to reduce heating and spoilage, says Dr Mark Leggett

"For lower % DM bales which will be eaten within a day, for example 35% DM or below on dairy units, where there is little risk of aerobic spoilage (heating), consider using Ecosyl 100 to preserve the bale by improving the initial fermentation.

"If bales will be open for two or three days before being consumed, for example on beef and sheep units, focus on the initial fermentation but also on tackling spoilage and heating. In these cases consider Ecocool. This contains two beneficial bacteria, one for fermentation and one to target the yeasts and moulds that cause heating and spoilage. Alternatively, consider Double Action Ecobale, which includes two bacteria, one of which is effective at fermenting drier material, plus a feed-approved preservative. 

"It's also important to store and stack bales correctly to avoid splitting. At lower %DMs don't stack them too high. Above 35% DM, they can potentially be stacked three or four high."

...

Cut to Clamp

For more information on Volac's Cut to Clamp initiative, visit the Cut To Clamp hub to find a range of practical advice, support, resources and tools.

This post is funded by Volac.

More on Partner Content

Partner Insight: Pregnant Cows are Profitable Cows – How to Influence Fertility Naturally

Partner Insight: Pregnant Cows are Profitable Cows – How to Influence Fertility Naturally

Managing reproductive efficiency in dairy cows is crucial to herd profitability, with research showing that factors like nutrition, health, and stress management can drastically improve conception rates.

Phibro
clock 15 October 2024 • 4 min read
Partner Insight: Strawberry-Picking Robot to Speed Up Harvest and Tackle Labour Crisis

Partner Insight: Strawberry-Picking Robot to Speed Up Harvest and Tackle Labour Crisis

Low-cost robots which can harvest and package strawberries in a matter of seconds have been trialled in Essex as part of ambitious plans to tackle a labour shortage in the industry.

University of Essex
clock 14 October 2024 • 3 min read
Partner Insight: How to Enhance Pre-emergence Herbicide Performance this Autumn

Partner Insight: How to Enhance Pre-emergence Herbicide Performance this Autumn

As farmers prepare for the upcoming autumn planting season, the significance of soil health, weather conditions and the right adjuvant in optimising pre-emergence herbicide performance cannot be overstated, warns Interagro.

Interagro
clock 11 October 2024 • 4 min read